| toolpath orientation | geometry |
| allowance bottom | 0.5 mm |
| axial cutting depth | 2.0 mm |
| chip removal | chip removal off |
| coolant | coolant off |
| feedrate | 0 mm/min |
| spindle | 0 rev/min |
| through spindle coolant | through spindle coolant off |
| 1 |
toolpath:
WS 1 TP 1 [cutter location trajectory]geometry properties
| ||||||||
| 2 |
toolpath:
WS 1 TP 2 [cutter location trajectory]geometry properties
| ||||||||
| 3 |
toolpath:
WS 1 TP 3 [cutter location trajectory]geometry properties
| ||||||||
| 4 |
toolpath:
WS 1 TP 4 [cutter location trajectory]geometry properties
|